|Frame||Aluminum folding frame|
|Fork||Aluminum one forged fork|
|Crankset||52T x 170mm aluminum cranks|
|Wheel size||40 cm|
|Batteries type||Panasonic 18650|
|Battery capacity||5800mAh / 208.8Wh|
|Charging time||about 3 hours|
|Charging voltage limit||42V|
|Motor Rated voltage||250W|
|Motor rated torque||7.3Nm|
|Motor maximum speed||20 km/h|
|Brake||Shimano IM31 Rear roller brake|
|Braking distance||dry road 4m
wet road 15m (at speed 20 km/h)
|Wireless connections||Bluetooth 4.0 BLE|
|Control dial||4.5cm 160×128 TFT screen|
IDbike Torque Measurement Method
The QiCycle features the IDbike Torque Measurement Method (TMM) sensor which intelligently measures the torque you apply and adjusts power based on your pedaling. The torque sensor is a type of throttle, which determines how much power you need to feed the engine, based on how hard the rider pedals. This is different from the speed sensor pedals, which simply measures how fast you pedal.
250W high-speed brushless motor and Shimano Nexus3-speed gear hub
What if the bicycle ran out of battery? You can still enjoy cycling with the aid of Shimano Gear Shifters. You can pedal (relatively) comfortably no matter what the terrain. Shift to an easier gear on climbs or when you’re riding into the wind. Use a harder gear on flats or if the wind is blowing from behind. Compared with ordinary motor, 250W high-speed brushless motor features small magnetic resistance, faster acceleration, weight is lighter, easier mountain biking. The MC (motor controller) determine how much electrical power output required and increase manpower.
The QiCycle has a bike computer so that you can check out all the fitness-related parameters such as calories burned, distance traveled, speed and more! The trip computer can not only help the rider to switch between four kinds of power mode (Fitness, Power Saving, Balanced, Extra powerbut) also real-time monitoring riding data: dynamic power, speed, distance, calorie consumption, synchronize data to the cloud through the mobile phone app.
The Panasonic battery
The Panasonic battery consists of 20 small batteries from 208.8 Wh each with a total capacity of 18650 Wh that provides a range of 45 Km with a full charge of about 3 hours. It is equipped with a battery management system (BMS) that allows you to not only recharge management but also provides a protection system to prevent from operating beyond the threshold of minimum safe load (Safe Operating Area), monitors the State of charge, secondary/complementary data calculates them on display, and check the status of the battery.
Portable folding design
Thanks to the lightweight aluminum frame design, even if it equipped with a large-capacity lithium battery and high-speed brushless motor, the folding bike weighs only 14.5 kg. With QiCycle you can keep a bicycle in your car since it’s foldable as it does not take up lots of space in your car!